
Damage
The damaged door edge
The break-in split and tore the wood along the closing edge of the commercial entry door.
Project details
The first photo shows the break-in damage along the closing edge. The second shows the door during restoration with the damaged section prepared for repair.

Damage
The break-in split and tore the wood along the closing edge of the commercial entry door.
Repair
The damaged wood along the closing edge was prepared and rebuilt while the existing glazed door remained in place.

Similar completed work
See other entrance repairs completed after forced entry and damage around the closing or locking area.
Before
AfterForced-entry damage affected the door and frame area before the entrance was repaired.
View project →
Before
AfterThe damaged lock side of the entry door was rebuilt and reinforced after the break-in.
View project →
Before
AfterA split jamb and damaged strike area were rebuilt around the locking points.
View project →Project questions
Common questions when a wood entrance is damaged during a break-in.
Often, yes. Repair depends on the extent of the damage and whether the remaining door, frame and hardware are suitable to retain.
No. When damage is concentrated along an edge, lock area or frame section, the repair may focus on that damaged part instead of replacing the complete entrance.
Send the full door, the damaged edge, the frame, and close views of the lock and strike area.
Need door repair?
Show the full door, damaged edge, frame, lock and strike area so we can review the repair scope.
+1 (437) 755-557524/7 emergency response across Toronto and the GTA.