
Before
The damage
The narrow entry-door sidelite glass was cracked.
Project details
Sidelite glass must match the existing opening beside the entry door. The damaged panel was measured first, then replaced after the new glass was prepared.

Before
The narrow entry-door sidelite glass was cracked.
After
The old panel was removed and the prepared glass was installed. The entrance sidelite was restored without temporary board-up.

Similar completed work
See how similar windows, doors, storefronts and exposed openings were handled.
Before
AfterA residential door in Forest Hill had broken glass that left the entrance exposed. BoardUp protected the door opening first, then replaced the door glass.
View project →
Before
SecuredBroken entry-door glass left an Etobicoke entrance exposed. BoardUp secured the glass opening so the property remained protected until the correct replacement glass was ready.
View project →
Before
SecuredA sliding door glass opening in Oshawa was damaged and exposed. BoardUp secured the opening so the home remained protected until the correct replacement glass was ready.
View project →Project questions
These are common questions when the damage looks similar.
Yes. Narrow entry-door sidelites often require measurements before the replacement panel is prepared.
No. The damaged panel remained safely in place until the prepared replacement glass was installed.
Yes. The sidelite can often be replaced while the existing door and surrounding frame remain in place.
Similar damage?
Include the full entrance, the narrow glass panel and the surrounding frame so we can confirm the measurements and replacement-glass requirements.
+1 (437) 755-5575Emergency service across Toronto and the GTA.